ATTENTION:

ALL ITEM NAMES ARE IN GREEN. PLEASE KNOW YOUR ITEM NAME WHEN CALLING, E-MAILING OR FAXING.

TO PLACE AN ORDER:

E-MAIL: gunstands@aol.com                          (not a secure site.)

FAX: 903-677-2820 (straight to my desk only.)

PHONE: (toll free) 1-800-256-4820.

MAIL: 8414 Co. Rd. 3907, ATHENS, TX 75752

 

E-Mail

 

 

Custom Orders Welcome/How to Order/Dealers Near You
 
ALL ITEM NAMES ARE IN GREEN, know your item name when calling.

 

 


*** THANKS FOR THE HEADS-UP NOTICE. MY ORDER ARRIVED THIS MORNING AND THE SWORDS ARE NOW HANGING ON THE WALL. GOOD FINISH COLOR - MATCHES MY POOL TABLE PRETTY WELL. THANKS! ***
D. Miller-TN

 

 

2-Knife Horizontal Display Stand

 

 

 

 


This stand is designed to atttractively present two special knives. Two knife holders are attached to a heavy-duty 1-1/8" thick base. Distance between holders is 7-3/4" with handle recesses lined with felt. (green, red, maroon, brown, black or gray).
Oak or Ash: $31.50
Mahogany, Cherry or Black Walnut: $38.50
Native Texas Mesquite, Pecan or Blackjack Oak: $47.70
S&Pkg.: $10.12

 

 


***YOU CAN'T ACT LIKE A SKUNK WITHOUT GETTING WIND OF IT.***

 

 

Single Vertical Knife Display Stand

 

 

 

 


This is an ideal stand to present that single special collectors knife in a vertical position. The recess for the handle is felt lined in red, green, brown, black, maroon or gray. The heavy duty base has a recess drilled opening to accept the knife blade point.
Oak or Ash: $13.75
Mahogany, Cherry of Black Walnut: $15.50
Native Texas Mesquite, Pecan or Blackjack Oak: $17.75
S&Pkg.: $8.27

*** LEARN TO AVOID FRUSTRATION BY MEETING EVERY PROBLEM WITH AN IMMEDIATE DECISION!***

 

 

3-Piece, 6-Knife Horizontal Display Stand

 

 

 

 


This stand attractively displays up to 6-knives in a horizontal position. It measures 10-3/8" wide X 12" deep X 4-1/2" tall. The handle recesses are felt lined in green, red, brown, black, maroon or gray. Two wing nuts fasten the three piece stand together. No tools needed for assembly or disassembly. This simple display stand lets you display a large number of knives in a very small space.
Oak or Ash: $31.00
Mahogany, Cherry or Black Walnut: $36.00
Native Texas Mesquite, Pecan, Mulberry or Blackjack Oak: $43.00
S&Pkg.: $9.67

 

 


***LIFE ISN'T FAIR... BUT IT'S STILL PRETTY GOOD!***

 

 

2-Piece Knife Display Stand

 

 

 

 

 

4-KNIFE

 

$35.00

 

3-KNIFE

 

$30.00

 

2-KNIFE

 

$25.00

 

Shipping & Packaging $8.56

 

 

NOTE: S & P costs can be greatly reduced when this item is packed & shipped with other purchases.
 

 

 


*** "GAYLE, RECEIVED THE RACKS THIS MORNING AND THEY ARE BEAUTIFUL - JUST WHAT I WAS LOOKING FOR. IT HAS BEEN A PLEASURE DOING BUSINESS WITH YOU. I CERTAINLY WILL LET OTHERS KNOW HOW PLEASED I AM. THANKS! ***
Steve-Washington

Multiple Bayonet Vertical Dispay Wall Rack
 
 
This wall rack is designed to display up to 20 bayonets of various sizes.  Rack measurements are: 8-13/16" deep X 18-1/2" tall X 23-1/2" wide and comes with a convenient hang-board making it very easy to hang rack on wall.  Top row has 5 openings 2" diameter - 4" o. c..  Middle row has 6 openings 1-1/2" diameter - 3-1/2" o. c.  Bottom row has 6 openings 1-1/2" diameter, 3 at 1" diameter and 2 at 3/4" diameter.  Rack can be customized if required.
PRICING
Oak, Ash

$140.00

BlackWalnut, Cherry, Mahogany

$151.00

Native Texas Pecan, Hickory

$160.00

Yellow Pine

$125.00

S & Pkg. $27.48

 

 

 

2-Piece, 2-Sword Horizontal Wall Display Rack

 

 


This simple 2-piece rack is designed to horizontally display two swords on a wall. It measures 2-3/8" wide X 14" tall X 4" deep. Wall attachment holes are pre-drilled and attachment screws are included. Felt lines the handle recesses. Felt colors are green, red, maroon, brown, black and gray. There is 6-3/4" of space between top and bottom sword recesses. Distance between holders can be any needed distance allowing racks to fit any length sword.
Oak or Ash: $30.50
Mahogany, Cherry or Black Walnut: $36.00
Native Texas Mesquite, Pecan or Blackjack Oak: $44.00
S&Pkg.: $8.42

 

 


 

 

2-Piece Single Sword/Scabbard Horizontal Display Stand

 

 


This small, adjustable, two-piece stand is designed to attractively display one sword and one sword scabbard in a horizontal presentation. Measurements are 5" deep X 3-1/2" wide X 5-7/8" tall. The handle and scabbard recesses are felt lined. Felt colors are green, red, maroon, brown, gray and black. This pair of racks will fit any length sword/scabbard.
Oak or Ash: $25.00
Mahogany, Cherry or Black Walnut: $30.00
Native Texas Mesquite, Pecan or Blackjack Oak: $35.00
S&Pkg.: $7.72

 

 


*** NEVER MAKE PREDICTIONS, ESPECIALLY ABOUT THE FUTURE" -Casey Stengel ***

2-Piece, 7-Sword Horizontal Wall Display Rack

 

 


This pair of racks is designed to display 7-swords of any length on a wall. It measures 39" tall X 2-1/2" wide X 4" deep. Attachment holes are pre-drilled and attachment screws are included. Handle recesses are felt lined. Felt colors are green, red, maroon, gray, brown and black. You decide the needed distance between racks to fit your swords.
Oak or Ash: $54.00
Mahogany, Cherry, or Black Walnut: $74.00
Native Texas Mesquite, Pecan or Blackjack Oak: $99.00
S&Pkg.: $14.33

 

 


*** LIFE ISN'T TIED WITH A BOW, BUT IT'S STILL A GIFT ***

 

 

2-Sword In Scabbard Wall Display Rack

 

 


This attractive wall display rack measures 24" wide X 14" tall X 5-3/4" deep and is designed to present two swords in their scabbards. All recesses are felt lines. Felt colors are green, red, maroon, brown, black and gray. Attachment holes are pre-drilled and attachment screws are included. Swords/scabbords can be displayed from left to right, right to left or in oppisite directions. Some light re-assembly is required. You will only need a screwdriver.
Oak or Ash: $44.00
Mahogany, Cherry or Black Walnut: $55.00
Native Texas Mesquite, Pecan or Blackjack Oak: $68.00
S&Pkg.: $9.38

 

 


*** "I RECEIVED THE STAND YESTERDAY. IT'S EXACTLY WHAT I WANTED" ***
G. Molgand - VT

Custom Gun & Sword Wall Display Rack 
M 1 Garand & Officers Saber in Oak w/Fruitwood Stain
 
Here is a rack to display your favorite long gun and sword. Stand measures 15" tall X 26-1/4" wide. Can be custom made to display additional guns and/or swords. Recesses are lined with felt. You have a choice of hangers on the back or mounting holes drilled 16" OC with mounting screws furnished.
Shown in Solid Oak-Cost $45.00.
Add $8.50 for Black Walnut, Cherry or Mahogany.
S&Pkg. $14.48 (Shipped KD/assemble with screwdriver)

9-Sword-N Scabbard Vertical Stand
Use to store or display up to 9 swords in scabbards. Two outside support legs attached at top with two stove bolts, fender washers and wing nuts, making stands angle adjustable. A removable cross-board can be added between outside support legs, allowing stand to be clamped to table if needed. Add $5.00 for clamp board. Recesses are lined with felt and bottom is padded with indoor/outdoor carpet. (green, brown, black, maroon or gray).
Oak: $69.00
Black Walnut: $75.00
Cherry: $80.00
Mesquite: $89.00
S&Pkg: $21.09 each

"The (Tai Chi Sword) stand came today. It worked out great. Many Thanks." - Barry, Venice, FL

7-Piece, 6-Sword Folding Horizontal Display Stand

 

 

ASH

This stand is foldable making the angle of display adjustable. Measurements are: 21-1/2" wide X 35-3/4" tall X variable depth (17" average). There are 18-1/2" between front display legs. It will display horizontally 6-swords in scabbards with 5-1/4" of space between swords. Swords can be displayed left to right, right to left or in opposing directions. All recesses are felt lined. Felt color choices are green, red, maroon, brown, gray and black. Easily adapts to exhibit tables and can be clamped to table if needed.
Oak or Ash: $72.00
Mahogany, Cherry or Black Walnut: $97.00
Native Texas Mesquite or Pecan: $128.00
S&Pkg: $14.31

 

 

Custom Orders Welcome/How to Order/Dealers Near You

 

 


Click on a button to find more information on the product you're interested in:

NEW! Dehumidifiers for the protection of your gun collection!