Fort Sandflat Gun Stands

---

OAK

 

BLACK WALNUT

---

• NO ASSEMBLY­ some assembly is required with the 18-gun size. A screwdriver is the only tool needed
• UNFOLD, LOCK & USE
• FOLD & CARRY
• SOLID OAK
• OIL FINISH
• PADDED BUTT & BARREL REST (green, brown, black, gray or maroon)
• FITS GUN SHOW TABLE
• SIX AVAILABLE SIZES:
• 8-10-12-14-16 & 18 GUNS
• SHIPPING & PKG. - $21.16 (S&Pkg. for ASSEMBLED 18-gun Stand - $38.46)

• Use to store or display 9 long-guns, scoped or non-scoped
• Does not fold/sits on floor or table
• 32" long/support legs must be assembled
• Padded barrel recesses and bottom (green, brown, black, gray or maroon)

Oak: $69.00

Black Walnut: $75.00

Cherry: $80.00

(Shipping & Pkg. $19.90 ea.)

BLACK WALNUT SHOWN

Also Available: For no additional cost, the two outside support legs can be attached at the top via 2 stove bolts, washers & wing nuts, making stand adjustable. A removable cross board can be added between outside support legs allowing stand to be clamped to table if needed. Add $5.00 for clamp board.

No Assembly

• Unfold, Lock & Use (can be clamped to table)

• Solid Oak
• Felt Padded (green, red, brown, black, gray or maroon)
• Fits gun show table
• 9 & 11 gun sizes
• Shipping & Pkg. $16.85 (Cont. U.S. only)
• TX residents add 6.25% Sales Tax
•  

                                 OAK

STAND	HEIGHT	LENGTH	OPEN WIDTH	CLOSED WIDTH	OAK COST
9 GUN	26-1/4"	21-1/2"	17"	7"	$60
11 GUN	31-1/4"	21-1/2"	19-3/4"	7"	$70
Add $10 for Black Walnut - Add $20 for Native Texas Mesquite - Add $15 for Cherry - Add $5 for Brass Ladder Locks

***LAW OF LOCATION: NO MATTER WHERE YOU GO, THERE YOU ARE***

3-Long-Gun Vertical Corner Stand

Gun enthusiasts are always leaning guns in a corner somewhere, and ask if I make a corner stand. I do now. It will hold 3-long-guns and can be easily placed in any corner. The stand extends 13-1/4" from the corner and is 41-1/2" tall. Some easy assembly is required. You will need a screwdriver to re-attach the sides.

OAK SHOWN

Shipping & Packaging: $21.09

 

PLEASE NOTE: The smaller stand will accomodate maybe one scoped weapon. It is designed for non-scoped weapons. Select the larger stand for scoped weapons. If stand is to be used for double-barreled shotguns, please tell us at time of order. The distance from the butt recess to the top of the barrel recess is 33-1/4".

  A 3-Gun Corner Stand is also available that will hold 3 scoped weapons. It is just like the Standard 3-Gun Corner Stand except the base extends 16" from the corner.

Add $19.00 to above prices for the scoped version.

Shipping & Packaging: $22.74

---

Coming Soon... 3-Gun Corner Stands that attach to the wall!

---

..."Some people spend an entire lifetime wondering if they made a difference in the world. But, the Marines don't have that problem" --Ronald Reagan

---

Rotary Vertical Long-Gun Stand

 

BIRCHDIAMETER-BARREL OPENINGS - 2-1/2"

• Some Hand Assembly Required (No tools needed)
• Solid Plywood
• Oil Finish
• Fits Gun Show Table/Large Safes/Gun Rooms
• Guns will Not Tip Out-no bungee cords or magnets needed
• Assembled Stand Height is 36-1/2" ­ Pipe Length 32"
• Mounted on 1,000 lb. Capacity Metal Ball-Bearing Lazy Susan Turntable
• The Gun You Want is Always at the Front

  Four Sizes Available

  16-Gun ­ Base 25-1/2" Diameter

  12-Gun ­ Base 23" Diameter

  10-Gun ­ Base 20" Diameter

  7-Gun ­ Base 18" Diameter

Option 1: Felt in barrel openings. We install $10.00 / We furnish felt & you install $5.00. Available in (green, brown, black, gray or maroon)

Option 2: Carpet cut & fitted into the butt recess openings. We install $10.00 Available in green, brown, black, gray or maroon.

Option 3: 1-1/4" casters attached to base frame. Easily roll stand where you need it. Add $16.00 ­ no assembly/comes ready to roll.

Option 4: 3/4" Pipe can be painted a variety of colors. Add $10.00/pipe.

OAK

 

Suitcase Gun Stand

The suitcase gun stand is not a new concept. It has been around for years. Most such stands are cheaply made and soon "rock" back and forth making you afraid to place your guns in them. That won't happen with the FORT SANDFLAT SUITCASE GUN STAND. This stand is made from 3/4" oak stock with the movable parts interlocking and held firmly in place with an adequate number of hanger bolts, fender washers and wing nuts. The bottoms (sides) are 1/8" hardboard tempered both sides and are covered with carpet for your guns to rest on. The barrel recesses are felt-lined . The above pictured case holds 14 long-guns and can be disassembled and folded into a lockable, portable suitcase with brass handle.

Cost:

14-Gun $102.00 Plus actual shipping (open-26" wide X 28-1/2" long)

16-Gun $112.00 Plus actual shipping (open-26" wide X 32-1/8" long)

CUSTOM SIZES AVAILABLE UPON REQUEST

---

...Don't argue with an idiot. People watching may not be able to tell the difference...

---

Flat-Back Vertical Long-Gun Stand

---

BLACK WALNUTOAK

NOTE: Scroll down to see options available with Flat-Back Vertical Stands: Hang-Board - Option #1 Solid Back - Option #2 Security Cable & Lock - Option #3 Storage Compartment - Option #4 Storage Compartment with Keyed Lock - Option #5 Storage Compartment with Drawer - Option #5A

FLAT-BACK VERTICAL GUN STAND SIZES
No. Guns	Stand Length
5	18"
6	20-3/4"
7	23-1/2"
8	26-1/4"
9	29"
10	31-3/4"
11	34-1/2"
12	37-1/4"
13	40"
14	42-3/4"
15	45-1/2"
16	48-1/4"
17	51"

FOR NON-SCOPED GUNS	FOR SCOPED GUNS
33-1/4" Tall	33-1/4" Tall
3-1/2" Deep Top	5-1/2" Deep Top
10-1/8" Deep Bottom	12-5/8" Deep Bottom

• Can Build to Custom Lengths
• Can Sit on Floor, Atop Another Piece of Furniture, Or Attach to Wall
• Shipped KD (You Attach Sides with Screws)
• Bottom & Barrel Recesses Lined (green, brown, black, gray or maroon)
•  
• Option #1:
• 45° Hang-Board Optional  Stand Can Be Very Easily Hung on or Removed From Wall

>

We have NO printed materials to send out. No Catalogs / No Brochures. ALL INFORMATION IS ON THIS WEB SITE. Should you have any questions, E-Mail us at: gunstands@aol.com or Call us at: or 1-800-256-4820 Thanks.

WEATHERED WOOD

---

Option #3 - Now Available With Solid Wood Back     OAK     Our popular Flat-Back Verticle Long-Gun Stands are now available with solid wood backs ­ The backs consist of a number of 3/4" thick boards joined via tongue-and-groove, and are predrilled to be attached to back with provided screws. Of course the boards are finished to match the stand. Back is shipped KD. You will need a screwdriver to assemble. Cost depends on width of stand and type of wood.    

OAK	$1.64 per inch of stand width
BLACK WALNUT	$1.84
CHERRY	$2.40
MAHOGANY	$2.50
PINE	$1.50
MAPLE	$1.96
WESTERN RED CEDAR	$1.74
NATIVE TEXAS MESQUITE	$2.80
QUARTER SAWN RED OAK	$2.40
Example: A back for a 12-gun oak stand would be 37.25" X $1.64 = $61.09 Add $12.55 for additional S&P

---

OAK

Option #5 - STORAGE COMPARTMENT WITH KEYED LOCK   OAK Now you can order your Flat Back Stands not only with a great storage compartment or drawer, but also with a keyed lock. Lock for added security - the lock face can be either brass or silver. Cost: $24.95

---

  OPTION #5A - Storage compartment with drawer mounted on full extension drawer guides OAKWEATHERED WOOD  

SIZE	DESCRIPTION	COST
For 5 to 10 gun flat-back stands	One drawer with heavy duty full extension drawer guides with 2 brass drawer pulls.	$115.26 Plus act. S&P
For 11 to 17 gun flat-back stands	Two drawers with heavy duty metal full extension drawer guides with 4 brass drawer pulls.*	$194.52 Plus act. S&P

*Silver star drawer pulls optional - $15.00 each.  

---

... If you have a bad cough, take a large dose of laxitives. You may cough once.... but after that you're cured!...

---

    Folding Horizontal Long-Gun Stands    

---

    OAK  

• Horizontal Display - 5 long guns
• Composed of 7 pieces/No tools required/Assemble by hand
• Solid Oak/Ash
• Completely adjustable & foldable
• Can be clamped to display table
• Can be quickly disassembled into a small bundle for transport/storage
• Lined with felt(green, red, brown, black, gray or maroon)

Cost: $ 69.00 - Shipping & Packaging $15.75

Add $10.00 for Black Walnut

Add $15.00 for Native Texas Mesquite

---

..."Those who hammer their guns into plows will plow for those who do not"...  Thomas Jefferson

---

3 Gun Horizontal 3-Piece Long-Gun 45° Display Stand

OAK

 

• Displays Long-Guns Horizontally at an approximate 45° Angle
• Especially effective for high-value guns
• Stand made from solid Oak with felt padded recesses. (green, red, brown, black, gray or maroon) All edges rounded.
• Stand breaks down into 3 pieces
• Can easily be assembled or disassembled by hand-no tools required.
• 18" Tall X 18" Deep
• Weight approx. 8 lbs.

Cost: $37.15 Shipping & Packaging $8.17

Add $2.00 for Black Walnut

---

...Just a short note to thank you for the quick shipment of the flat-back stands and cordial way you handled the mis-order. Really sorry about that. I realize it takes two to foul-up a phone order, so I surely accept my half of the blame. Just so you know, I now have 32 of your flat-backs and 4 rotaries holding 484 rifles and you and I have only messed up one order in all that time! Gayle, thanks for handling the error so professionally. I really do appreciate it! ...H. Swink, KS

---

 

3 Piece Horizontal Long-Gun Display Stands

OAK

• 2, 3, 4, & 5 Gun Sizes Available
• Excellent for Lever Action Rifles
• Felt lined (green, red, brown, black, gray or maroon)
• Simple, quick & portable / no tools required / hand assemble / break down into 3 flat & compact pieces for storage / transportation
• Solid Oak

1-1/2" GUN OPENINGS
	DEEP	TALL	COST
5-GUN	9-3/8"	15-3/4"	$41.00
4-GUN	7-1/2"	14"	$35.00
3-GUN	6"	12-3/8"	$30.00
2-GUN	5-1/8"	10"	$25.00
Length of all stands= 16-1/2" outside to outside
Add $3.00 for Black Walnut, Cherry, Cedar & Mahogany
Shipping & Packaging $9.98

NOTE: 1-1/2" Openings work well for .22's and lever action rifles, but will not work for shotguns, military weapons & hunting rifles.

2" GUN OPENINGS
	DEEP	TALL	COST
5-GUN	12"	17-1/4"	$42.00
4-GUN	10"	14-3/4"	$36.00
3-GUN	7-3/8"	14"	$31.00
2-GUN	5-3/4"	10-3/4"	$26.00
Length of all stands= 16-1/2" outside to outside
Add $4.00 for Black Walnut, Cherry, Cedar & Mahogany
Shipping & Packaging $9.98

NOTE: 2" Openings work well for shotguns, military weapons & hunting rifles, but do not work well for 22's & lever action rifles.

 

---

..."History does not entrust the care of freedom to the weak or timid." -  President Dwight D. Eisenhower

---

3-PIECE 4-GUN TILTED BARREL LONG GUN STAND

OAK

EXTRA HEAVY-DUTY STAND

Extremely stable & very portable

Uprights 1-1/8" thick solid Oak & sittting on 3/4" x 3-5/8" x 12-1/4" supports

Size: 12-1/2" deep x 24-1/2" tall x 20-3/8" wide (space between uprights 15-5/8")

Breaks down into 3 pieces for storage & transportation

Assembly by hand ­ no tools needed

Guns can be presented left to right or right to left, with more desirable side always to front

Ample space between guns

Barrels tilted slightly upwards for attention-getteing attractive display

Recess openings 1-1/2" or 1-7/8" wide & lined with felt (green, red, brown, black, gray or maroon)

Finsihed with Spanish Oak stain & hand-rubbed Tung Oil for lasting durability

 

Cost: OAK - $55.00

BLACK WALNUT - $65.00

Shipping & Packaging $10.50 ea.

NOTE: S & P costs can be greatly reduced when this item is packed & shipped with multiple or other purchases.

---

Gayle, just wanted to let you know that we received the oak rifle vise and are very pleased with it. You did an excellent job on the vise and the packaging. My husband's grandfather's rifle looks great on our mantle. Thanks again. - C. Rittenhouse, ID

---

9-Gun, 3-Piece Horizontal Long-Gun Stand

PINE

• Made from solid 3/4" plywood with tung oil finish.
• Felt padded (green, red, brown, black, gray or maroon).
• No tools needed for assembly ­ just hand-tighten wing nuts.
• Breaks down into three flat pieces for easy packing, storage & transporting.
• When assembled stand measures 16-1/2" long X 24-1/4" deep X 19-1/4" tall.
• Fits gun show table ­ very stable.

Pine-$68.00

Oak-$78.00

Black Walnut-$88.00

+$14.57 Shipping & Packaging

 

---

Light travels faster than sound. That's why some people appear bright until you hear them speak.

---

Custom One-Piece Long-Gun Display Stand

OAK

Do you have that one special long-gun you would like to display somewhere?

I can custom-make a stand for you to make that unique display possible. with just a few quick measurements from your special gun, I can design a stand to properly fit your gun and beautifully display it for your friends or customers to see and admire.

Special descriptions or nameplates can be attached to the beveled front edge. Special lazer engraving or relief carvings can be incorporated into the stand.

The upright which supports the gun are lined with leather or felt. The base is supported by four non-skid soft rubber feet. You have a choice of over 28 species of solid wood from which to choose.

BLACK WALNUT

Displays can be butt left or butt right.­ You choose which side you want to display.

Cost depends on wood species, size of stand, name plates, etc.

Normal cost ranges from about $50 to $100. When calling (1-800-256-4820) have your gun, a measuring tape and a flat surface with a straight edge (like a counter top, desk or table - not a round table) available. We will take several measurements.I'll then provide youwith price quote and measured drawing.

---

..."Long ago I became convinced that the seeing see little" - Helen Keller, 1933...

---

2 Piece Single Long-Gun Display Stand (NRA)

BLACK WALNUTOAK

• Level Horizontal Display
• Easily adjusts to any length gun
• Two individual parts/No assembly/Sit on flat surface/felt lining (green, red, brown, black, gray or maroon)
• Simple, quick & portable
•  
• Oak-$16.50
• Black Walnut-$17.50
• Cherry, Mahogany or Mesquite-$18.50

Shipping & Packaging $8.72

NOTE: S & P costs can be greatly reduced when this item is packed & shipped with other purchases.

Custom Orders Welcome/How to Order/Dealers Near You

---

...Be kinder than necessary. Everyone you meet is fighting some kind of battle....

---

2 Piece Single Long-Gun Vertical Wall Stand

• Displays one long-gun (can be made for scoped weapons).
• Ideal for office, game room, hunting camp, etc.
• Attaches to wall. Four #8 X 2" screws included.
• Measurements: Bottom ­ 4-1/2" wide X 5-3/4" tall X 7-5/8" deep
• Padded Top: 4" wide X 4-1/4" deep X 3-1/2" tall ­ Felt lined.
• Carpet & felt colors: (green, maroon, black, brown & gray)
• Adapts to any length long-gun.

Solid Oak: $38.00

Shipping & Packaging $7.78

Add $5.00 for Black Walnut, Cherry, Mahogany or Mesquite.

 

 

OAK

---

...Only two defining forces have ever offered to die for you: 1. Jesus Christ 2. The American G.I. One died for your soul, the other for your freedom...

---

2 Piece, 2-Gun Angled Long-Gun Wall Stand

• Attractively Display any long-gun at slight angle.
• Adapts to any length
• Measurements: Bottom ­ 10" wide X 6-3/4" deep X 6" tall.
• Padded Top: 10" wide X 4" deep X 4" tall
• Felt lined lip: Surrounds butt rest
• Carpet & felt colors: (green, maroon, black, brown & gray)
• Mounts to wall with 8 #8X2" screws-included.
• Ideal for that tight spot between windows, doors or other objects in office, game room, hunting camp, etc.

Solid Oak: $55.00

Shipping & Packaging $9.00

• Add $5.00 for Black Walnut, Cherry, Mahogany or Mesquite.
• Can be made for additional guns. Cost: Add $15.00 per additional gun & actual S&P.

 

 

OAK

 

---

Gayle, your cabinetry works were excellent. In over 17 feet of stand length, I did not find one cabinet error. Your joints were well cut and fitted flush. Each stand was relatively easy to re-assemble. Felt linings and the base cloth on each stand were expertly cut and installed. The wall hanging board is a must for stand installation. You conducted all business in a fair and open manner and did exactly what you said you would. Our sincere thanks. - Kirk & Deb, Midland, TX

---

2 Piece, 2-Gun Flat Long-Gun Wall Stand

• Attractively Display any long-gun flat against the wall.
• Design fits nicely into the narrow space behind most open doors.
• Attach to wall with 8 #8 X 2" screws-included.
• Measurements: Bottom ­ 4" deep X 16" long X 5-3/4" tall.
• Padded Top: 4" deep X 16" long X 3-1/2" tall
• Barrel Openings: 2-1/2" ­ felt lined
• Felt lined lip: Surrounds butt rest
• Carpet & felt colors: (green, maroon, black, brown & gray)

Solid Oak: $55.00

Shipping & Packaging $9.00

Add $5.00 for Black Walnut, Cherry, Mahogany or Mesquite.

• Can be made for additional guns. Cost: Add $15.00 per additional gun & actual S&P.

OAK

 

---

...And then there are those things I just wonder about sometimes... like what hair color do they put on the driver's license of bald men? Why isn't the nummber 11 pronounced oneety-one? Whatever happened to Preparations A through G? If 4 out of 5 people SUFFER from diarrhea.... does that mean that one enjoys it? How do they know that 3 out of 4 people make up 75% of the population? And when blondes have more fun, do they know it?

---

 

E-Mail

Click on a button to find more information on the product you're interested in: