wallmount

Wall Mounted Pistol Stands
We often receive requests for pistol stands designed to attach to or hang on walls. Shown below are several such stands we have made for our customers. Maybe you will find one that meets your requirements. New ideas are always welcome. Unless a " PRICE CHART" is with the stand, the price shown will be for a stand exactly liked the stand shown. Any stand shown can be made from numerous wood species and to perhaps different size and/or numbers of guns at different prices.

Pictured above are photos of two 8-Gun Vertical Pistol Stands with solid 1/2" thick backs. Stands are simply attached to wall through the stands back. In this case the wall was concrete block and Tapcon (concrete) screws were used. Stands were made from solid Black Walnut finished with Black Walnut stain plus tung oil with maroon liners.
SEE PRICE CHART BELOW.

Above 3 photos show a 10- Gun Vertical Pistol Stand made from solid Oak finished with fruitwood stain and maroon liners. The back consists of 1/2" thick hang-board. The bottom part of hang-board is attached to wall and stand with other half of hang-board is simply hung over wall attached part.
NOTE: The 8-gun vertical & 10-gun vertical stands with solid backs or hang-board are the same depth, width and length-- 22-1/4" X 8-1/2" X 7-1/2" . But the spaces between barrel recesses are different. the 8-gun stand lends itself better to large revolvers while the 10-gun stand is more fitted for semi-auto pistols. SEE PRICE CHART BELOW.

Price Chart 8 or 10-Gun Vertical Pistol Stand w/Solid Back to Hang on Wall
Wood Species	Stand/Cost
Ponderosa Pine	$86.04
Yellow Pine	92.47
Knotty Alder	89.61
Aromatic Red Cedar	94.21
Native Texas Pecan	95.78
Rustic Red Oak	91.83
Ash	96.04
Red Oak	97.15
Weathered Wood	101.22
Hickory	97.44
Maple	90.33
Cherry	104.79
Mahogany	117.19
Black Walnut	137.43
Native Texas Mesquite	156.29
Qtr. Sawn White Oak	119.06
NOTE: Add $3.50 for Hang Board
Actual S & Pkg charged

ATTENTION:

Ever-changing shipping and packaging costs prevent us from quoting exact shipping amounts for our many products. We want to be fair with our customers and avoid over-charging or under-charging anyone.
Therefore we will charge only the exact amount required to ship our products to you.

Left photo: End view showing hang-board
Middle photo: Front view of stand showing open drawer
Right photo: Front view of stand showing drawer closed

Pictured above is a 6-Gun Vertical Pistol Stand made from solid Oak finished with tung oil with small felt lined drawer with brass drawer pull and maroon liners. Hang board attaches to wall and stand fits onto hang-board -- very secure. Notice, all screws were countersunk and plugged with hand made Oak plugs. This stand costs: $231.16

Left photo: Front view - stand loaded with guns and other items in lower open storage
Right photo: Angled view of same stand.

This 6-Gun Vertical Pistol Stand shown above can rest on a flat surface or hang on wall with provided hang-board. The open storage area was 10" tall. Made from solid Native Texas Pecan with clear tung oil finish and black liners. Again, all screws were countersunk and plugged with hand made Native Texas Pecan plugs. This stand costs:$189.90

Wall-Mounted Single Pistol Stands

Wall Mounted Single Semi-Auto Pistol Stand / Native Texas Mesquite / Salem Maple Stain
& Tung Oil

Wall Mounted Single Revolver Pistol Stand - Maple

Wall mounted Single Semi-Auto Pistol Stand / Black Walnut / Tung Oil / w Pistol & Clip Storage

Shown above are 3 photos of Wall Mounted Single Pistol Stands. Stands can be for semi-auto, revolver or Luger. Stands are very simple - - they just attach to wall. Add $6.75 to each stands normal price shown on CUSTOM SINGLE REVOLVER STAND page or the CUSTOM SINGLE SEMI-AUTO PISTOL STAND page.

Custom Wall Hanging Handgun Display Shelves

* Great display for gun rooms.
* Displays 3 or MORE semi-auto pistols, revolvers or Lugers.
* Designed to display handguns with side view.
* Handguns can point left, right, or towards each other - your choice.
* Because handguns differ in lengths and size, some measurements may be required.
* Shelves made from numerous wood species and finishes.
* Wall mounting holes pre-drilled on 16" centers for easy attachment unless your specify otherwise. Mounting screws supplied.
* Shelves can be made for any combination of semi-autos, Lugers or revolvers.
* We must have calibers of semi-auto pistols and if clips are single or double stacks.
* Also, shelves can be made to accommodate numerous individual Single Semi-Auto Pistol Stands and/or Single Revolver Display Stands allowing display easily to be changed as desired.

3 Semi-Auto Pistol Wall Display Shelf. 28" long X 3-1/2" deep X 7-3/4" tall. Add minimum of 9" for each additional semi-auto or Luger.

3 Revolver Wall Display Shelf. 36" long X 4-1/2: deep X 8-1/2" tall. Add minimum of 12" for each additional revolver.

Price Chart: Semi-Auto & Luger Display Shelves - 3 Gun Minimum
Wood Species	Cost/Shelf	Cost Per Additional Gun
Yellow Pine	$51.36	$19.32
Knotty Alder	50.63	19.07
Aromatic Red Cedar	52.22	19.60
Native Texas Pecan	51.77	19.46
Ash	52.99	19.86
Red Oak	53.51	20.03
Hickory	53.64	20.08
Maple	55.13	20.57
Cherry	57.07	21.22
Mahogany	62.86	23.15
Black Walnut	72.29	26.29
Native Texas Mesquite	81.09	29.23
Est. Shipping & Packaging for 3-Gun $23.98 Actual S&Pkg. For All Other Sizes

Price Chart: Revolver Display Shelves - 3 Gun Minimum
Wood Species	Cost/Shelf	Cost per Additional Gun
Yellow Pine	$88.01	$31.68
Knotty Alder	87.63	31.41
Aromatic Red Cedar	89.44	32.02
Native Texas Pecan	90.18	32.25
Ash	90.33	32.56
Red Oak	90.91	33.14
Hickory	91.07	33.87
Maple	92.80	36.08
Cherry	95.01	33.87
Mahogany	101.67	36.08
Black Walnut	112.50	39.70
Native Texas Mesquite	122.61	43.07
Est. Shipping & Packaging for 3-Guns $25.28 Actual S&Pkg. For All Other Sizes

*NOTE: S & P costs can be greatly reduced when this item is Packed & Shipped with other purchases.

"STORING AND DISPLAYING AMERICA'S GUNS, RODS, KNIVES, SWORDS AND COLLECTIBLES SINCE 1984"